Options
Schilt, Stephane
Nom
Schilt, Stephane
Affiliation principale
Fonction
Ancien.ne collaborateur.trice
Identifiants
Résultat de la recherche
15 Résultats
Voici les éléments 1 - 10 sur 15
- PublicationAccès libreCoherently-averaged dual comb spectrometer at 7.7 µm with master and follower quantum cascade lasers(2021-6)
; ; ; ; ; ; - PublicationAccès libreUltra-low noise microwave generation with a free-running optical frequency comb transfer oscillatorWe present ultra-low noise microwave synthesis by optical to radio-frequency (RF) division realized with a free-running or RF-locked optical frequency comb (OFC) acting as a transfer oscillator. The method does not require any optical lock of the OFC and circumvents the need for a high-bandwidth actuator. Instead, the OFC phase noise is electrically removed from a beat-note signal with an optical reference, leading to a broadband noise division. The phase noise of the ∼15 GHz RF signal generated in this proof-of-principle demonstration is limited by a shot-noise level below −150 dBc/Hz at high Fourier frequencies and by a measurement noise floor of −60 dBc/Hz at 1 Hz offset frequency when performing 1,100 cross-correlations. The method is attractive for high-repetition-rate OFCs that lead to a lower shot-noise, but are generally more difficult to tightly lock. It may also simplify the noise evaluation by enabling the generation of two or more distinct ultra-low noise RF signals from different optical references using a single OFC and their direct comparison to assess their individual noise.
- PublicationAccès libre10 kHz linewidth mid-infrared quantum cascade laser by stabilization to an optical delay lineWe present a mid-infrared quantum cascade laser (QCL) with a sub-10 kHz full width at half-maximum linewidth (at 1 s integration time) achieved by stabilization to a free-space optical delay line. The linear range in the center of a fringe detected at the output of an imbalanced Mach–Zehnder interferometer implemented with a short free-space pathlength difference of only 1 m is used as a frequency discriminator to detect the frequency fluctuations of the QCL. Feedback is applied to the QCL current to lock the laser frequency to the delay line. The application of this method in the mid-infrared is reported for the first time, to the best of our knowledge. By implementing it in a simple self-homodyne configuration, we have been able to reduce the frequency noise power spectral density of the QCL by almost 40 dB below 10 kHz Fourier frequency, leading to a linewidth reduction by a factor of almost 60 compared to the free-running laser. The present limits of the setup are assessed and discussed.
- PublicationAccès libreFrequency Noise Characterization of a 25-GHz Diode-Pumped Mode-Locked Laser With Indirect Carrier-Envelope Offset Noise Assessment
; ; We present a detailed frequency noise characterization of an ultrafast diode-pumped solid-state laser operating at 25-GHz repetition rate. The laser is based on the gain material Er:Yb:glass and operates at a wavelength of 1.55 μm. Using a beating measure-ment with an ultralow-noise continuous-wave laser in combination with a dedicated electrical scheme, we measured the frequency noise properties of an optical mode of the 25-GHz laser, of its repetition rate and indirectly of its carrier-envelope offset (CEO) signal without detecting the CEO frequency by the standard approach of nonlinear interferometry. We ob-served a strong anticorrelation between the frequency noise of the indirect CEO signal and of the repetition rate in our laser, leading to optical modes with a linewidth below 300 kHz in the free-running laser (at 100-ms integration time), much narrower than the individual contributions of the carrier envelope offset and repetition rate. We explain this behavior by the presence of a fixed point located close to the optical carrier in the laser spectrum for the dominant noise source. - PublicationAccès librePower Spectrum Computation for an Arbitrary Phase Noise Using Middleton’s Convolution Series: Implementation Guideline and Experimental IllustrationIn this paper, we revisit the convolution series initially introduced by Middleton several decades ago to determine the power spectrum (or spectral line shape) of a periodic signal from its phase noise power spectral density. This topic is of wide interest, as it has an important impact on many scientific areas that involve lasers and oscillators. We introduce a simple guideline that enables a fairly straightforward computation of the power spectrum corresponding to an arbitrary phase noise. We show the benefit of this approach on a computational point of view, and apply it to various types of experimental signals with different phase noise levels, showing a very good agreement with the experimental spectra. This approach also provides a qualitative and intuitive understanding of the power spectrum corresponding to different regimes of phase noise.
- PublicationAccès libreRb-stabilized laser at 1572 nm for CO2 monitoringWe have developed a compact rubidium-stabilized laser system to serve as optical frequency reference in the 1.55-μm wavelength region, in particular for CO2 monitoring at 1572 nm. The light of a fiber-pigtailed distributed feedback (DFB) laser emitting at 1560 nm is frequency-doubled and locked to a sub-Doppler rubidium transition at 780 nm using a 2-cm long vapor glass cell. Part of the DFB laser light is modulated with an electro-optical modulator enclosed in a Fabry-Perot cavity, generating an optical frequency comb with spectral coverage extending from 1540 nm to 1580 nm. A second slave DFB laser emitting at 1572 nm and offset-locked to one line of the frequency comb shows a relative frequency stability of 1.10-11 at 1 s averaging time and <4.10-12 from 1 hour up to 3 days.
- PublicationAccès libreElectrically-driven pure amplitude and frequency modulation in a quantum cascade laser
; ; ; ; We present pure amplitude modulation (AM) and frequency modulation (FM) achieved electrically in a quantum cascade laser (QCL) equipped with an integrated resistive heater (IH). The QCL output power scales linearly with the current applied to the active region (AR), but decreases with the IH current, while the emission frequency decreases with both currents. Hence, a simultaneous modulation applied to the current of the AR and IH sections with a proper relative amplitude and phase can suppress the AM, resulting in a pure FM, or vice-versa. The adequate modulation parameters depend on the applied modulation frequency. Therefore, they were first determined from the individual measurements of the AM and FM transfer functions obtained for a modulation applied to the current of the AR or IH section, respectively. By optimizing the parameters of the two modulations, we demonstrate a reduction of the spurious AM or FM by almost two orders of magnitude at characteristic frequencies of 1 and 10 kHz compared to the use of the AR current only. - PublicationAccès libreFrequency noise correlation between the offset frequency and the mode spacing in a mid-infrared quantum cascade laser frequency comb
; ; ; ; The generation of frequency combs in the mid-infrared (MIR) spectral range by quantum cascade lasers (QCLs) has the potential for revolutionizing dual-comb multi-heterodyne spectroscopy in the molecular fingerprint region. However, in contrast to frequency combs based on passively mode-locked ultrafast lasers, their operation relies on a completely different mechanism resulting from a four-wave mixing process occurring in the semiconductor gain medium that locks the modes together. As a result, these lasers do not emit pulses and no direct self-referencing of a QCL comb spectrum has been achieved so far. Here, we present a detailed frequency noise characterization of a MIR QCL frequency comb operating at a wavelength of 8 μm with a mode spacing of ~ 7.4 GHz. Using a beat measurement with a narrow-linewidth single-mode QCL in combination with a dedicated electrical scheme, we measured the frequency noise properties of an optical mode of the QCL comb, and indirectly of its offset frequency for the first time, without detecting it by the standard approach of nonlinear interferometry applied to ultrafast mode-locked lasers. In addition, we also separately measured the noise of the comb mode spacing extracted electrically from the QCL. We observed a strong anti-correlation between the frequency fluctuations of the offset frequency and mode spacing, leading to optical modes with a linewidth slightly below 1 MHz in the free-running QCL comb (at 1-s integration time), which is narrower than the individual contributions of the offset frequency and mode spacing that are at least 2 MHz each. - PublicationAccès libreXUV Sources Based on Intra-Oscillator High Harmonic Generation with Thin-Disk Lasers: Current Status and Prospects
; ; ; ; ; - PublicationAccès libreCharacterizing the carrier-envelope offset in an optical frequency comb without traditional f-to-2f interferometryWe present a new method to measure the frequency noise and modulation response of the carrier-envelope offset (CEO) beat of an optical frequency comb that does not make use of the traditional f-to-2f interferometry. Instead, we use an appropriate combination of different signals to extract the contribution of the CEO frequency without directly detecting it. We present a proof-of-principle validation realized with a commercial Er:fiber frequency comb and show an excellent agreement with the results obtained using a standard f-to-2f interferometer. This approach is attractive for the characterization of novel frequency comb technologies for which self-referencing is challenging, such as semiconductor mode-locked lasers, microresonator-based systems, or GHz repetition rate lasers.