Options
Numerical modeling of strain transfer from rock mass to a fibre optic sensor installed inside a grouted borehole
Auteur(s)
Maison d'édition
: American Rock Mechanics Association
Date de parution
2012-6-24
De la page
1503
A la page
1509
Résumé
Strain measurements in underground excavation are usually done locally, with extensometers or similar devices placed within 10-15 meters of adit or stope faces, mainly to gage development of the EDZ (excavation damaged zone) and assess its evolution and impact on local safety (rock falls, rapid deterioration of wall condition...). However, the calibration of three-dimensional stress analysis models used to assess excavation geometry and sequencing requires strain (displacement) measurements in those parts of the rock mass that are in the elastic domain for some or all of their active design life. Recently developed distributed fibre optic sensors are now being used to measure local linear displacements continuously in a large rock mass volume in real mining conditions in Canada. Grouted inside a borehole and therefore encased in a material of far lower stiffness that the rock mass, an optical fibre may register strains different from those actually occurring in the rock mass. A number of factors affect the process of rock mass strain conveyance through the grout to the fibre. This paper reports a study that simulates the borehole-grout-fibre interaction to find how the strain transfer takes place and whether there are any issues serious enough to warrant alterations in installation procedures and grout materials.
Notes
, 2023
Nom de l'événement
Rock Mechanics / Geomechanics Symposium
Lieu
Chicago, IL, USA
Identifiants
Type de publication
conference paper
Dossier(s) à télécharger
