Voici les éléments 1 - 3 sur 3
  • Publication
    Accès libre
    Frequency Comb Stabilization of Ultrafast Lasers by Opto-Optical Modulation of Semiconductors
    Gürel, Kutan
    ;
    ;
    Wittwer, Valentin Johannes
    ;
    ;
    In this paper, we review the current state and discuss new developments in opto-optical modulation (OOM) of semiconductor elements for frequency comb self-referenced stabilization of ultrafast lasers. This method has been successfully used for carrier-envelope offset (CEO) frequency stabilization of diodepumped solid-state lasers operating in 1-μm and 1.5-μm regimes, providing high feedback bandwidth and resulting in low noise performance. We compare the achieved results for Er- and Yb-based laser materials and in different regimes of repetition rates up to 1 GHz. In addition, we present the first semiconductor OOM for CEO stabilization in an ultrafast fiber laser. Moreover, we discuss requirements and design guidelines for OOM chips. In most demonstrations, semiconductor saturable absorber mirrors have been used for OOM, which in parallel were also responsible for pulse formation. By separating the OOM functionality from the pulse formation, we expect that it will enable low-noise CEO stabilization in other types of ultrafast lasers, such as, for example, high-power Kerr-lens mode-locked thin disk lasers.
  • Publication
    Accès libre
    Carrier-Envelope Offset Frequency Stabilization of a Fiber Laser by Cross Gain Modulation
    We present the first carrier-envelope offset (CEO) frequency stabilization of a fiber laser by cross gain modulation. The Yb-doped fiber laser is mode-locked by nonlinear polarization evolution and emits 32-nm wide dissipative solitons at a repetition rate of 125 MHz with 150 mW of average output power. A continuous wave laser signal at a wavelength of 1025 nm is used as an intracavity power modulator. A low power of only 200 μW of modulator signal is coupled into the fiber laser and amplified in the gain segment. This signal cross modulates the laser gain, achieving 40 times larger modulation bandwidth of the intracavity laser power than with standard pump-current control. A tight CEO lock is demonstrated with 361 mrad of residual integrated phase noise (from 1 Hz to 1 MHz). The method allows easy implementation in many existing fiber laser frequency combs based on various saturable absorbers and fiber configurations.
  • Publication
    Accès libre
    XUV Sources Based on Intra-Oscillator High Harmonic Generation with Thin-Disk Lasers: Current Status and Prospects
    Ultrafast thin-disk laser (TDL) oscillators provide higher intracavity pulse energy, average power, and peak power levels than any other femtosecond laser oscillator technology. They are suitable for driving extreme nonlinear interactions directly inside the laser oscillator. High harmonic generation (HHG) driven inside ultrafast TDL oscillators is a very recent approach for the generation of coherent extreme ultraviolet (XUV) light at multi-megahertz repetition rates. In this paper, we review the current state of the development, discuss the technological potential, and give an outlook toward the future developments. We compare the current performance to established technologies and evalu-ate possible limitations. We discuss future improvements, such as reduction of the driving pulse duration and increase of the intracavity peak power, efficient extraction of the XUV light from the cavity, and carrier-envelope offset frequency stabilization of the generated XUV light. Due to the power scalability of the TDL concept and the possibility to operate in a spectrally broadened regime with pulse durations below the gain bandwidth limitation, intra-oscillator HHG with TDLs has a high potential for powerful table-top multi-megahertz coherent XUV light sources for science and applications.