Options
Südmeyer, Thomas
Nom
Südmeyer, Thomas
Affiliation principale
Fonction
Directeur
Email
thomas.sudmeyer@unine.ch
Identifiants
Résultat de la recherche
Voici les éléments 1 - 10 sur 10
- PublicationAccès libreCutting-Edge High-Power Ultrafast Thin Disk Oscillators
; ; Keller, UrsulaA growing number of applications in science and industry are currently pushing the development of ultrafast laser technologies that enable high average powers. SESAM modelocked thin disk lasers (TDLs) currently achieve higher pulse energies and average powers than any other ultrafast oscillator technology, making them excellent candidates in this goal. Recently, 275 W of average power with a pulse duration of 583 fs were demonstrated, which represents the highest average power so far demonstrated from an ultrafast oscillator. In terms of pulse energy, TDLs reach more than 40 µJ pulses directly from the oscillator. In addition, another major milestone was recently achieved, with the demonstration of a TDL with nearly bandwidth-limited 96-fs long pulses. The progress achieved in terms of pulse duration of such sources enabled the first measurement of the carrier-envelope offset frequency of a modelocked TDL, which is the first key step towards full stabilization of such a source. We will present the key elements that enabled these latest results, as well as an outlook towards the next scaling steps in average power, pulse energy and pulse duration of such sources. These cutting-edge sources will enable exciting new applications, and open the door to further extending the current performance milestones. - PublicationAccès libre275 W average output power from a femtosecond thin disk oscillator operated in a vacuum environment
; ; Keller, UrsulaWe present an ultrafast thin disk laser that generates an average output power of 275 W, which is higher than any other modelocked laser oscillator. It is based on the gain material Yb:YAG and operates at a pulse duration of 583 fs and a repetition rate of 16.3 MHz resulting in a pulse energy of 16.9 µJ and a peak power of 25.6 MW. A SESAM designed for high damage threshold initiated and stabilized soliton modelocking. We reduced the nonlinearity of the atmosphere inside the cavity by several orders of magnitude by operating the oscillator in a vacuum environment. Thus soliton modelocking was achieved at moderate amounts of self-phase modulation and negative group delay dispersion. Our approach opens a new avenue for power scaling femtosecond oscillators to the kW level. - PublicationAccès libreYb-doped mixed sesquioxides for ultrashort pulse generation in the thin disk laser setup
; - PublicationAccès libreSESAM mode-locked Yb:CaGdAlO4 thin disk laser with 62 fs pulse generation
; Keller, UrsulaWe present a semiconductor saturable absorber mirror (SESAM) mode-locked thin disk laser (TDL) based on Yb:CaGdAlO4 (Yb:CALGO) generating 62 fs pulses, which is the shortest pulse duration achieved from mode-locked TDLs to date. The oscillator operates at a repetition rate of 65 MHz and delivers 5.1 W of average output power. The short pulse duration of our TDL in combination with the high intracavity peak power of 44 MW makes this oscillator attractive for intracavity table-top extreme nonlinear optics applications such as high harmonic generation and vacuum ultraviolet frequency comb generation. The current average power was limited by the quality of the Yb:CALGO disk. However, power scaling of Yb:CALGO TDLs to the multi-10-W range with short pulse durations (<100 fs) appears feasible in the near future by using thinner disks of better quality and further optimized SESAMs. - PublicationAccès libreBeam delivery and pulse compression to sub-50 fs of a modelocked thin disk laser in a gas-filled Kagome-type HC-PCF fiber
; - PublicationAccès libreDual-gain SESAM modelocked thin disk laser based on Yb:Lu2O3 and Yb:Sc2O3
; Keller, UrsulaWe present for the first time a SESAM-modelocked thin-disk laser (TDL) that incorporates two gain materials with different emission spectra in a single TDL resonator. The two gain media used in this experiment are the sesquioxide materials Yb:Lu2O3 and Yb:Sc2O3, which have their spectral emission peak displaced by ≈7 nm. We can benefit from a combined gain bandwidth that is wider than the one provided by a single gain material alone and still conserve the excellent thermal properties of each disk. In these first proof-of-principle experiments we demonstrate pulse durations shorter than previously achieved with the single gain material Yb:Lu2O3. The oscillator generates pulses as short as 103 fs at a repetition rate of 41.7 MHz and a center wavelength of around 1038 nm, with an average output power of 1.4 W. A different cavity layout provides pulses with a duration of 124 fs at an output power of 8.6 W. This dual-gain approach should allow for further power scaling of TDLs and these first results prove this method to be a promising new way to combine the record output-power performance of modelocked TDLs with short pulse durations. - PublicationAccès libreUltrafast thin-disk laser with 80 µJ pulse energy and 242 W of average power
; ; Keller, UrsulaWe present a semiconductor saturable absorber mirror (SESAM) mode-locked thin-disk laser generating 80 µJ of pulse energy without additional amplification. This laser oscillator operates at a repetition rate of 3.03 MHz and delivers up to 242 W of average output power with a pulse duration of 1.07 ps, resulting in an output peak power of 66 MW. In order to minimize the parasitic nonlinearity of the air inside the laser cavity, the oscillator was operated in a vacuum environment. To start and stabilize soliton mode locking, we used an optimized high-damage threshold, low-loss SESAM. With this new milestone result, we have successfully scaled the pulse energy of ultrafast laser oscillators to a new performance regime and can predict that pulse energies of several hundreds of microjoules will become possible in the near future. Such lasers are interesting for both industrial and scientific applications, for example for precise micromachining and attosecond science. - PublicationAccès libreFrequency comb offset dynamics of SESAM modelocked thin disk lasers
; ; Keller, UrsulaWe present a detailed study of the carrier-envelope offset (CEO) frequency dynamics of SESAM modelocked thin disk lasers (TDLs) pumped by kW-class highly transverse multimode pump diodes with a typical M2 value of 200-300, and give guidelines for future frequency stabilization of multi-100-W oscillators. We demonstrate CEO frequency detection with > 30 dB signal-to-noise ratio with a resolution bandwidth of 100 kHz from a SESAM modelocked Yb:YAG TDL delivering 140 W average output power with 748-fs pulses at 7-MHz pulse repetition rate. We compare with a low-power CEO frequency stabilized Yb:CALGO TDL delivering 2.1 W with 77-fs pulses at 65 MHz. For both lasers, we perform a complete noise characterization, measure the relevant transfer functions (TFs) and compare them to theoretical models. The measured TFs are used to determine the propagation of the pump noise step-by-step through the system components. From the noise propagation analysis, we identify the relative intensity noise (RIN) of the pump diode as the main contribution to the CEO frequency noise. The resulting noise levels are not excessive and do not prevent CEO frequency stabilization. More importantly, the laser cavity dynamics are shown to play an essential role in the CEO frequency dynamics. The cavity TFs of the two lasers are very different which explains why at this point a tight CEO frequency lock can be obtained with the Yb:CALGO TDL but not with the Yb:YAG TDL. For CEO stabilization laser cavities should exhibit high damping of the relaxation oscillations by nonlinear intra-cavity elements, for example by operating a SESAM in the roll-over regime. Therefore the optimum SESAM operation point is a tradeoff between enough damping and avoiding multiple pulsing instabilities. Additional cavity components could be considered for supplementary damping independent of the SESAM operation point. - PublicationAccès libreKerr lens mode-locked Yb:CALGO thin-disk laser
; ; ; ; We demonstrate the first Kerr lens mode-locked Yb:CaGdAlO4 (Yb:CALGO) thin-disk laser oscillator. It generates pulses with a duration of 30 fs at a central wavelength of 1048 nm and a repetition rate of 124 MHz. The laser emits the shortest pulses generated by a thin-disk laser oscillator, equal to the shortest pulse duration obtained by Yb-doped bulk oscillators. The average output power is currently limited to 150 mW by the low gain and limited disk quality. We expect that more suitable Yb:CALGO disks will enable substantially higher power levels with similar pulse durations. - PublicationAccès librePhase-stabilization of the carrier-envelope-offset frequency of a SESAM modelocked thin disk laser
;