Voici les éléments 1 - 4 sur 4
Pas de vignette d'image disponible
Publication
Métadonnées seulement

Modeling the impact of ethanol on the persistence of benzene in gasoline-contaminated groundwater

2002, Molson, John W, Barker, James F, Frind, Emil O, Schirmer, Mario

[1] The effect of ethanol on the persistence of benzene in gasoline-contaminated aquifers is simulated using a multicomponent reactive transport model. The conceptual model includes a residual gasoline source which is dissolving at the water table into an aquifer containing a limited amount of dissolved oxygen. The coupled processes include nonaqueous phase liquid (NAPL) source dissolution, transport of the dissolved components, and competitive aerobic biodegradation. Comparisons are made between dissolved benzene plumes from a gasoline spill and those from an otherwise equivalent spill containing 10% ethanol (gasohol). Simulations have shown that under some conditions a 10% ethanol component in gasoline can extend the travel distance of a benzene plume by up to 150% relative to that from an equivalent ethanol-free gasoline spill. The increase occurs because ethanol preferentially consumes oxygen, which reduces the biodegradation rate of benzene. The impact is limited, however, because sufficient oxygen disperses behind the ethanol plume into the slightly retarded benzene plume. A sensitivity analysis for two common spill scenarios showed that background oxygen concentrations and benzene retardation have the most significant influence on ethanol-induced benzene persistence. The results are highly relevant in light of the increasing use of ethanol-enhanced fuels throughout the world and the forthcoming ban of methyl tertiary-butyl-ether (MTBE) in California and its probable replacement by ethanol by the end of 2002.

Pas de vignette d'image disponible
Publication
Métadonnées seulement

A relative-least-squares technique to determine unique Monod kinetic parameters of BTEX compounds using batch experiments

1999, Schirmer, Mario, Butler, Barbara J, Roy, James W, Frind, Emil O, Barker, James F

An analysis of aerobic m-xylene biodegradation kinetics was performed on the results of laboratory batch microcosms. A modified version of the computer model BIO3D was used to determine the Monod kinetic parameters, k(max) (maximum utilization rate) and K-S (half-utilization constant), as well as the Haldane inhibition concentration, K-I, for pristine Borden aquifer material, The proposed method allows for substrate degradation under microbial growth conditions. The problem of non-uniqueness of the calculated parameters was overcome by using several different initial substrate concentrations. With a relative-least-squares technique, unique kinetic degradation parameters were obtained. Calculation of the microbial yield, Y, based on microbial counts from the beginning and the end of the experiments was crucial for reducing the number of unknowns in the system and therefore for the accurate determination of the kinetic degradation parameters, The kinetic parameters obtained in the present study were found to agree well with values reported in the literature. (C) 1999 Elsevier Science B.V. All rights reserved.

Pas de vignette d'image disponible
Publication
Métadonnées seulement

Influence of transient flow on contaminant biodegradation

2001, Schirmer, Mario, Durrant, Graham C, Molson, John W, Frind, Emil O

The rate of biodegradation in contaminated aquifers depends to a large extent on dispersive mixing processes that are now generally accepted to result from spatial variations in the velocity field. It has been shown, however, that transient flow fields can also contribute to dispersive mixing. The influence of transient flow on biodegrading contaminants is particularly important since it can enhance mixing with electron acceptors, further promoting the reactive process. Using numerical simulations, the effect of transient flow on the behavior of a biodegradable contaminant is evaluated here both with respect to the development of apparently large horizontal transverse dispersion and also,vith respect to enhanced mixing between the substrate (electron donor) and electron acceptor. The numerical model BIO3D, which solves for advective-dispersive transport coupled with Monod-type biodegradation of substrates in the presence of an electron acceptor, was used for the simulations. The model was applied in a two-dimensional plan view mode considering a single substrate. Transient flow fields were found to yield larger apparent transverse dispersion because the longitudinal dispersivity also acts transverse to the mean flow direction. In the reactive case, the transient now field increases substrate-oxygen mixing, which in turn enhances the overall rate of biodegradation. The results suggest that in the case of moderate changes of flow directions, a steady-state flow field can be justified, thereby avoiding the higher computational costs of a fully transient simulation. The use of a higher transverse horizontal dispersivity in a steady flow field can, under these conditions, adequately forecast plume development.

Pas de vignette d'image disponible
Publication
Métadonnées seulement

Biodegradation modelling of a dissolved gasoline plume applying independent laboratory and field parameters

2000, Schirmer, Mario, Molson, John W, Frind, Emil O, Barker, James F

Biodegradation of organic contaminants in groundwater is a microscale process which is often observed on scales of 100s of metres or larger. Unfortunately, there are no known equivalent parameters for characterizing the biodegradation process at the macroscale as there are, for example, in the case of hydrodynamic dispersion. Zero- and first-order degradation rates estimated at the laboratory scale by model fitting generally overpredict the rate of biodegradation when applied to the field scale because limited electron acceptor availability and microbial growth are not considered. On the other hand, Field-estimated zero- and first-order rates are often not suitable for predicting plume development because they may oversimplify or neglect several key field scale processes. phenomena and characteristics. This study uses the numerical model BIO3D to link the laboratory and field scales by applying laboratory-derived Monod kinetic degradation parameters to simulate a dissolved gasoline field experiment at the Canadian Forces Base (CFB) Borden. All input parameters were derived from independent laboratory and field measurements or taken from the literature a priori to the simulations. The simulated results match the experimental results reasonably well without model calibration. A sensitivity analysis on the most uncertain input parameters showed only a minor influence on the simulation results. Furthermore, it is shown that the flow field, the amount of electron acceptor (oxygen) available, and the Monod kinetic parameters have a significant influence on the simulated results, it is concluded that laboratory-derived Monod kinetic parameters can adequately describe field scale degradation, provided all controlling factors are incorporated in the field scale model. These factors include advective-dispersive transport of multiple contaminants and electron accepters and large-scale spatial heterogeneities. (C) 2000 Elsevier Science B.V. All rights reserved.