Options
Milnes, Ellen
Nom
Milnes, Ellen
Affiliation principale
Email
Ellen.Milnes@unine.ch
Identifiants
Résultat de la recherche
Voici les éléments 1 - 2 sur 2
- PublicationAccès libreProcess-based groundwater salinisation risk assessment methodology: Application to the Akrotiri aquifer (Southern Cyprus)(2011)
Groundwater salinisation is a major groundwater contamination issue world-wide and can be caused by different processes, such as seawater intrusion, agrochemical pollution, geogenic contamination and irrigation-induced salinisation. In many areas, several salinisation processes are superimposed. Since remedial measures vary for different salinisation processes, correct identification is fundamental for adequate design of management strategies: different strategies may be required in one and the same aquifer, depending on which salinisation process is active where in the domain.
A simulation-based salinisation risk assessment methodology is proposed, based on the principle of linear superposition of total dissolved solutes in groundwater. In a first step, the measured bulk salinity distribution is used to calibrate a numerical groundwater flow and transport model, accounting for all identified salinisation processes. Then, the bulk salinity distribution is decomposed into different salinity components by adapting the boundary conditions, running a simulation for each salinisation process separately. These simulation results yield the necessary components to calculate the risk index distributions, which are a measure of the respective future potential salinity increase. Overlaying the risk index distributions with a defined threshold concentration reveals risk areas requiring remediation or conservation measures with respect to each process. The risk area maps resulting from this methodology are a promising tool for the design of groundwater management schemes. They condense relevant information from complex dynamic processes obtained from numerical simulations and visualise the results in simple and static maps, accessible to decision makers who are not familiar with groundwater dynamics.
The different steps of the salinisation risk assessment procedure are first described and illustrated on a synthetic example and then applied to a real aquifer system in Southern Cyprus (Akrotiri), where three major salinisation processes are superimposed. - PublicationAccès libreThe problem of salt recycling and seawater intrusion in coastal irrigated plains : an example from the Kiti aquifer (Southern Cyprus)(2004)
; In coastal aquifers which are exploited for agricultural purposes, salinisation by salt recycling from irrigation is superimposed on the effects of seawater intrusion. Water quality degradation of irrigation pumping wells caused by seawater intrusion further enhances salinisation by irrigation, as the extracted solute mass is recycled and is not withdrawn from the system.
The main objective of this study is the investigation and quantification of the impact of solute recycling from irrigation relative to seawater intrusion. A solute mass budget was established by expressing the solute mass return flow as fraction of the extracted solute mass from wells by means of a solute mass return flow ratio (rr). The obtained expression for the relative contribution of solute recycling from irrigation is an exponential function of the return flow ratio rr and normalised time only (time versus system turnover time).
This expression was applied to an example, the Kiti aquifer (Southern Cyprus), where field observations suggest that solute return flow is a super-imposed salinisation mechanism. The contribution from solute recycling normalised with the solute mass flux entering from the sea after 20 years was found to be 1.5–8.5% in the extracted solute mass flux, depending on the estimation of the system turnover time.
Subsequently, a coupled finite element model, reflecting the main features of the Kiti aquifer was used as a possible ‘synthetic reality’, to test the relative impact of solute recycling on the spatial salinity distribution in a complex hydrogeological and geometrical setting. This was done by running two simulation scenarios : (1) recycling all the extracted solute back into the system and (2) leaving solute recycling aside and comparing the results of these two scenarios relative to each other and to patterns observed in the field. The results showed, that by introducing solute recycling into the numerical model as coupled boundary condition does not only respect the overall solute mass balance but can have an important impact on the salinity distribution, leading to a significant spreading of the mixing zone, similar to what was observed in the field.