Voici les éléments 1 - 8 sur 8
  • Publication
    Métadonnées seulement
  • Publication
    Accès libre
    Regional simulation of coupled hydromechanical processes in fractured and granular porous aquifer using effective stress-dependent parameters
    Field observations and laboratory experiments have clearly demonstrated that heavily perturbed / exploited aquifers are subject to 3D deformations, which may cause significant socio-economic impacts at regional scale. Most common examples include: (1) excessive pumping of groundwater from deep aquifers leading to land subsidence; (2) deep excavation of tunnels in permeable geological units resulting in dangerous differential consolidation, especially for dams; and (3) fluid injection into deep reservoirs causing ground uplift and microsismicity. These manifestations are due to a substantial modification of water pressures within the aquifer, leading to effective stress variations, and deformations. Moreover, such deformations modify hydrodynamic parameters, i.e., hydraulic conductivity, porosity and storage coefficient. In confined or deep aquifer systems, hydrodynamic parameters have to be considered as effective stress-dependent variables. In such environments the assumption of constant parameters can lead to significant quantitative errors. The afore-mentioned fluid-to-solid hydromechanical processes seem to be essentially governed by hydrogeological, geomechanical and structural properties of the aquifer system. In order to take into account the major processes, as well as their principal properties, regional coupled hydromechanical simulation necessarily requires simplification of the governing equations to be operational in real, large scale, hydrogeological systems.
    In the present thesis, model functions relating effective stress to hydrodynamic parameters are developed from fundamental hydrogeological and physical concepts, and implemented in the groundwater flow equation. Proposed stress-dependent equations are verified by a comparison with laboratory and field data. This is carried out for (1) fractured aquifers, i.e., consolidated rocks whose porosity results principally from the presence of fractures, cracks, joints and faults, and (2) granular porous aquifers, i.e., unconsolidated rocks whose porosity results from voids between solid grains. The relation between porosity and stress is also used to elaborate a deformation model for solving aquifer vertical volume change, i.e., ground settlement / uplift. A modelling approach is proposed in order to solve fluid-to-solid hydromechanical processes at regional scale, considering detailed geological structures. In this numerical method, hydrodynamic parameters are considered as stress-dependent variables.
    Exact analytical solutions solving flow in a media under stress are developed in order to verify the numerical method. The proposed approach is then applied to the analysis of real case studies. In particular, to (1) the abnormal deformation of the Zeuzier arch dam (Wallis, Switzerland) due to the drainage of an unexpected confined aquifer by the Rawyl exploratory adit; (2) the problematic of water inflow into tunnels based on the geological investigations undertaken by the Lyon-Turin railway project for the 57 km basis tunnel; as well as (3) the anthropogenic land subsidence affecting the Mexico City basin.
    Quantitative studies of deep aquifer systems considering constant hydrodynamic parameters result in non-accurate volumetric discharge rates and pressure head fields. On one hand, increasing effective stress leads to decreasing hydrodynamic parameters. This results in a diminution of volumetric flow rates through a deep reservoir or in a deep excavation. Moreover, the decrease of water pressure is slowed down due to the decrease of hydraulic conductivity. This has repercussion on consolidation time. On the other hand, if - and only if - the rock is elastic, decreasing effective stress can lead to increasing hydrodynamic parameters and volumetric discharge rates.
    For analytical solutions of volumetric discharge rate in deep wells or into a tunnel, the dependency of hydrodynamic parameters on effective stress can be taken into account by using a factor allowing stress consideration; whereas, in numerical analysis, such a process can be considered by implementing stress-dependent parameters in the groundwater flow and aquifer deformation models.
    The proposed numerical approach for fluid-to-solid coupled hydromechanical processes, is computationally simple, based on few unknowns, and efficiently reproduces regional consolidations in geologically oriented 3D meshes. This method is critical for hydrogeological and geomechanical quantitative studies investigating the sensitivity of deep aquifers on decreasing / increasing effective stresses. In particular for regional scale projects where water pressure may be subject to substantial modifications, such as dam construction or tunnel excavation, geologic radioactive waste repositories, deep reservoir exploitation for CO2 sequestration, geothermal energy production, as well as extraction of groundwater and / or hydrocarbons.
  • Publication
    Accès libre
    Regional Flow Simulation in Fractured Aquifers Using Stress-Dependent Parameters
    (2011) ;
    Cornaton, Fabien Joel
    ;
    A model function relating effective stress to fracture permeability is developed from Hooke's law, implemented in the tensorial form of Darcy's law, and used to evaluate discharge rates and pressure distributions at regional scales. The model takes into account elastic and statistical fracture parameters, and is able to simulate real stress-dependent permeabilities from laboratory to field studies. This modeling approach gains in phenomenology in comparison to the classical ones because the permeability tensors may vary in both strength and principal directions according to effective stresses. Moreover this method allows evaluation of the fracture porosity changes, which are then translated into consolidation of the medium..
  • Publication
    Accès libre
    Regional Flow and Deformation Analysis of Basin-Fill Aquifer Systems Using Stress-Dependent Parameters
    ;
    Cornaton, Fabien Joel
    ;
    Changes in effective stress due to water pressure variations modify the intrinsic hydrodynamic properties of aquifers and aquitards. Overexploited groundwater systems, such as basins with heavy pumping, are subject to nonrecoverable modifications. This results in loss of permeability, porosity, and specific storage due to system consolidation. This paper presents (1) the analytical development of model functions relating effective stress to hydrodynamic parameters for aquifers and aquitards constituted of unconsolidated granular sediments, and (2) a modeling approach for the analysis of aquifer systems affected by effective stress variations, taking into account the aforementioned dependency. The stress-dependent functions were fit to laboratory data, and used in the suggested modeling approach. Based on only few unknowns, this approach is computationally simple, efficiently captures the hydromechanical processes that are active in regional aquifer systems under stress, and readily provides an estimate of their consolidation.
  • Publication
    Accès libre
    Simulation of flow in fractured rocks using effective stress-dependent parameters and aquifer consolidation
    ;
    Cornaton, Fabien Joel
    ;
    Effective stress plays an important role in aquifer dynamics, especially in those affected by high variations of water pressures. Increasing/decreasing effective stresses affect hydrogeological parameters, even in media of high stiffness, such as fractured rocks. This study presents a modelling approach of groundwater flow in fractured rocks and aquifer deformation taking into account the dependency of hydrogeological parameters on effective stress. This approach has been illustrated by modelling a fractured aquifer dynamic, the Zeuzier arch dam settlement. The calibrated model showed agreement with measured data. This simulation method could be used to study the sensitivity of aquifers to variations in effective stress due to water pressure.
  • Publication
    Accès libre
    Modelling Discharge Rates and Ground Settlement Induced by Tunnel Excavation
    ;
    Dematteis, A.
    ;
    Torri, R
    ;
    Monin, N.
    ;
    ;
    Interception of aquifers by tunnel excavation results in water inflow and leads to drawdown of the water table which may induce ground settlement. In this work, analytical and numerical models are presented which specifically address these groundwater related processes in tunnel excavation. These developed models are compared and their performance as predictive tools is evaluated. Firstly, the water inflow in deep tunnels is treated. It is shown that introducing a reduction factor accounting for the effect of effective stress on hydrodynamic parameters avoids overestimation. This effect can be considered in numerical models using effective stress-dependent parameters. Then, quantification of ground settlement is addressed by a transient analytical solution. These solutions are then successfully applied to the data obtained during the excavation of the La Praz exploratory tunnel in the Western Alps (France), validating their usefulness as predictive tools.