Vignette d'image

Hofstetter, Daniel

Nom
Hofstetter, Daniel
Affiliation principale
Fonction
Ancien.ne collaborateur.trice
Identifiants
https://libra.unine.ch/handle/123456789/472

Résultat de la recherche

Filtres

8
8
Réinitialiser les filtres

Paramètres

Voici les éléments 1 - 8 sur 8
  • Publication
    Métadonnées seulement
    Continuous-wave operation of quantum cascade laser emitting near 5.6
    (2003)
    Yarekha, Dmitri A
    ;
    Beck, Mattias
    ;
    Blaser, Stéphane
    ;
    Aellen, Thierry
    ;
    Gini, Emilio
    ;
    Hofstetter, Daniel 
    ;
    Faist, Jérôme
    Buried heterostructure quantum cascade lasers emitting at 5.64 mum are presented. Continuous-wave (CW) operation has been achieved at -30degreesC for junction down mounted devices with both facets coated. A 750 mum-long laser exhibited 3 mW of CW power with a threshold current density of 5.4 kA/cm(2).
  • Publication
    Métadonnées seulement
    Bound-to-continuum and two-phonon resonance quantum-cascade lasers for high duty cycle, high-temperature operation
    (2002)
    Faist, Jérôme
    ;
    Hofstetter, Daniel 
    ;
    Beck, Mattias
    ;
    Aellen, Thierry
    ;
    Rochat, Michel
    ;
    Blaser, Stéphane
    Recent advances in quantum-cascade (QC) laser active-region design are reviewed. Based on a rate equation model of the active region, we show why new gain regions based on a two-phonon resonance or a bound-to-continuum transition exhibit significantly better performance than the traditional design based on a three-quantum-well active region. Threshold current densities as low as 3 kA/cm(2) at T = 300 K, operation with a peak power of 90 mW at 425 K, single-mode high-power operation up to temperatures above 330 K at lambda approximate to 16 mum and continuous wave operation up to T = 311 K are demonstrated. QC lasers able to operate at high duty cycles (50%) on a Peltier cooler were used in a demonstration of a 300-MHz free-space optical link between two buildings separated by 350 m.
  • Publication
    Métadonnées seulement
    Continuous wave operation of a mid-infrared semiconductor laser at room temperature
    (2002)
    Beck, Mattias
    ;
    Hofstetter, Daniel 
    ;
    Aellen, Thierry
    ;
    Faist, Jérôme
    ;
    Oesterle, Ursula
    ;
    Ilegems, Marc
    ;
    Gini, Emilio
    ;
    Melchior, Hans
    Continuous wave operation of quantum cascade lasers is reported up to a temperature of 312 kelvin. The devices were fabricated as buried heterostructure lasers with high-reflection coatings on both laser facets, resulting in continuous wave operation with optical output power ranging from 17 milliwatts at 292 kelvin to 3 milliwatts at 312 kelvin, at an emission wavelength of 9.1 micrometers. The results demonstrate the potential of quantum cascade lasers as continuous wave mid-infrared light sources for high-resolution spectroscopy, chemical sensing applications, and free-space optical communication systems.
  • Publication
    Métadonnées seulement
    Continuous wave operation of a 9.3 mu m quantum cascade laser on a Peltier cooler
    (2001)
    Hofstetter, Daniel 
    ;
    Beck, Mattias
    ;
    Aellen, Thierry
    ;
    Faist, Jérôme
    ;
    Oesterle, Ursula
    ;
    Ilegems, Marc
    ;
    Gini, Emilio
    ;
    Melchior, Hans
    High average power quantum cascade lasers at 9.3 mum using InP top cladding layers and both junction up and junction down mounting are presented. A 3 mm long, junction up mounted device emitted 54 mW average power at 30 degreesC and 11.5% duty cycle with a threshold current density of 3.72 kA/cm(2). A similar, but only 1.5 mm long device with high reflection coating on both facets was mounted junction down and tested at even higher duty cycles. At -27 degreesC, we achieved continuous wave operation with a threshold current density of 3.3 kA/cm(2). (C) 2001 American Institute of Physics.
  • Publication
    Métadonnées seulement
    Long-wavelength (
    (2001)
    Rochat, Michel
    ;
    Hofstetter, Daniel 
    ;
    Beck, Mattias
    ;
    Faist, Jérôme
    Room-temperature operation of long-wavelength, Fabry-Perot and single-mode quantum-cascade lasers at lambda approximate to 16 mum is reported. Multimode emission with pulsed peak power up to 400 mW at -40 degreesC and 220 mW at 30 degreesC is demonstrated. Single-mode emission up to 60 mW peak power has been achieved at 30 degreesC. (C) 2001 American Institute of Physics.
  • Publication
    Métadonnées seulement
    Edge- and surface-emitting 10.1
    (2000)
    Hofstetter, Daniel 
    ;
    Faist, Jérôme
    ;
    Beck, Mattias
    ;
    Muller, Antoine
    ;
    Oesterle, Ursula
    We present measurement results on high-power low-threshold quantum cascade-distributed feedback lasers emitting infrared radiation at 10.16 mu m. A lateral current injection scheme allowed the use of a strongly coupled surface grating without metal coverage and epitaxial re-growth. Although this design resulted in a simplified processing, the fabrication of high-performance edge- and surface-emitting devices was demonstrated. For the edge-emitting laser, we used a standard first-order grating with a period of 1.57 mu m, and for the surface emitter, a second-order grating with a period of 3.15 mu m was used. Maximal output powers in excess of 200 mW at 85 K and 70 mW at 300 K were achieved for both configurations. The threshold current densities at 85 K (300 K) were 1.85 kA/cm(2) (5.4 kA/cm(2)) and 2.1 kA/cm(2) (5.6 kA/cm(2)) for edge and surface emitters, respectively. (C) 2000 Elsevier Science B.V. All rights reserved.
  • Publication
    Métadonnées seulement
    Surface-emitting 10.1
    (1999)
    Hofstetter, Daniel 
    ;
    Faist, Jérôme
    ;
    Beck, Mattias
    ;
    Oesterle, Ursula
    We present measurement results on a surface-emitting quantum-cascade distributed feedback laser emitting infrared radiation at 10.1 mu m. The use of a second order grating enabled the laser to emit about 25% of its total optical power from the grating. The beam radiated from the grating was at a very low divergence angle of about 1 degrees x14 degrees. As already presented in a previous paper, we simplified the processing by using a lateral current injection scheme avoiding epitaxial regrowth. At 85 K, the laser emitted 210 and 60 mW of pulsed power from facet and grating, respectively; at room temperature, the corresponding numbers were 70 and 18 mW. Threshold current densities of 2.1 kA/cm(2) at 85 K and 5.6 kA/cm(2) at room temperature were observed. The device showed single mode behavior for the entire temperature range and all investigated power levels. In addition, a constant temperature tuning coefficient of 0.06 cm(-1)/K was seen. (C) 1999 American Institute of Physics. [S0003-6951(99)04350-8].
  • Publication
    Métadonnées seulement
    Demonstration of high-performance 10.16
    (1999)
    Hofstetter, Daniel 
    ;
    Faist, Jérôme
    ;
    Beck, Mattias
    ;
    Muller, Antoine
    ;
    Oesterle, Ursula
    We present measurement results on high-power low threshold quantum cascade distributed feedback lasers emitting infrared radiation at 10.16 mu m. A lateral current injection scheme allowed the use of a strongly coupled surface grating without metal coverage and epitaxial regrowth. Although this design resulted in a simplified processing, the fabrication of high performance devices was demonstrated. The laser emitted 230 mW of pulsed power at 85 K, and 80 mW at room temperature. Threshold current densities of 1.85 kA/cm(2) at 85 K and 5.4 kA/cm(2) at room temperature were observed. Since the spectrum showed single mode behavior for all temperatures and power levels of the operating range, this device will be ideal for optical sensor applications. (C) 1999 American Institute of Physics. [S0003-6951(99)01931-2].